Gas Injectors

Ozone Pump Injection

The Ozone Pump injects ozone or other gases by positive displacement. Easy installation. Does not change PSI, GPM or back pressure. High mass transfer and concentration of micro-bubbles. Ozone Pump's allow ozone to be injected in any line at any location without any restrictions.

	SPECIFICATIONS: OP: 120 or 240 VAC, 3.5 Amp, 0.5 CFM @ 50 PSI, 5 X 5 X 7, 10 lbs.
	SPECIFICATIONS: OPH: 120 VAC, 3.5 Amp, 1.0 CFM @ 50 PSI, 5 X 5 X 7, 12 lbs.

Venturi Injection

Venturi's are very efficient for inducing a vacuum from the existing water line flow & pressure. However they do cause a reduction in flow & pressure. While there are no moving parts to be replaced, Venturi's must be sized exactly to the existing flow & pressure.

MODELS: From 3 GPM to 100 GPM. Must have existing GPM & PSI FOR PROPER SIZING.