|
The
importance of Tannic Acid (Tannins):
Tannins
is a by-product of subterranean decayed vegetation. Tannins (clear yellow
colored water similar to urine) can cause yellowish stains on fixtures,
clothing, washers, virtually anything the water contacts. It can also leave
a residue in the piping, and the stains/residue are similar but not exactly
like iron. Tannins can appear in color from slightly yellow to dark
tan/brown.
What
is Organic Iron?
Organic
iron (not to be confused with iron bacteria) is the combination of tannins +
iron. Organic iron is removed when the tannins are removed. Organic iron can
pass through most filter media and cartridge filters, even when oxidized.
Therefore, the removal of tannins is paramount in order to achieve complete
iron removal.
Typically,
the organic iron level will be 50%-100% of the tannin level. Therefore,
itβs critical to have an accurate tannin ppm value.
What
is used to eliminate Tannins?
Tannins
can be removed using our special color removal media: Tannin Resin (TR). The
TR is practically permanent. The TR can be used when oxidized iron is
present. The
TR removal media is a salt-based regeneration similar to a water softener.
Almost
always TR can be placed inside a standard water softener resin tank. There
are occasions when combining the 2 resins is not recommended. In this case
the GAC4 cartridge
filter is used with complete success.
Whole House
Chlorine Taste & Odor Removal
Ozone Pure Water has
many systems that eliminate water problems such as:
- Iron
- Sulfur
- Manganese
- Color
- Chemical chlorine taste and odor
- Hazardous chemical by-products
Whole
House Treatment System:
GAC4 Filter: 7.5β x 22β, wall mounted, 1β mpt inlet/outlet.
This
filter will remove up to 5 ppm chlorine for over 100,000 gallons.
This equates to typically a once per year change.
The
GAC4 can also remove up to 2 ppm
of
Tannic Acid.
Ozone
Pure Water offers tannin and organic iron testing as well as removal
verification. We need 16oz of raw water so we can select the proper
filtration for you. Follow the directions on the Water
Testing page.
|